Don’t you just hate the way musty mold can turn a beautiful space into an unhealthy, inhabitable environment?
Mold is a fungus with multi-cellular filaments. The key to combating the mold is to control the moisture in your space.
The other option is using the best essential oils for mold to eliminate toxic fungus.
The basement is a prime location for mold because it has a lot of moisture sources.
Unfortunately, unlike other areas in the house that are well aerated, which helps with the drying of moisture, the basement takes longer to dry out resulting in a conducive environment for mold growth.
The challenge in dealing with mold in the basement lies in the undetectability of the fungus once it has grown in the walls and insulation.
The bathroom is the one space in the building that features a lot of water in all parts. Drying the bathroom is a perfect way to control the growth of mold in this space.
Removing the mold once it has grown can be done by basic scrubbing using a cloth, sponge or soft brush.
Use mold inhibiting solutions, like bleach or vinegar, to keep the bathroom clean after you have removed the mold.
Also, make sure you keep it well aerated by opening the window or leaving the door open.
If you have walls that have mold growing on them, you may need to replace the walls altogether. When fighting mold in the bathroom, it is important to focus on the areas like the grouting and sealer.
In the air
Mold can begin to grow indoors and this is dangerous for people and pets. It causes an allergic reaction to people with respiratory issues like asthma.
To reduce the chances of mold in your space, keep the humidity levels at below 60 percent as well as keep furnishings, like carpets and rugs, dry and well aerated.
Insulating your space also reduces the chances of condensation that contributes to mold growth.
Unfortunately, mold is very invasive and grows on any surface with moisture. The best way to deal with mold is to keep your space dry and eliminate sources of moisture.
Your car can be home to mold and, because it has so many nooks and crannies, it may be harder to notice it until the mold begins to stink up your ride.
It can grow on your seats and other interior parts of your car.
In the car, all it takes is a spill on the car floor or forgetting your car window open on a rainy day and you have mold growing in your car.
A professional clean is the best way to clear mold completely. In the event that mold grows unchecked in your vehicle’s interior it can cause irreparable damage.
To prevent mold in your car, park the vehicle in the direct sunlight with the doors and windows open. During the cleaning, make sure every part of the car is checked, including the seatbelts, carpet, cushions, and flooring.
Mold on plants looks like white grayish fuzz.
This fungus spreads on plants, especially in the humid to cool climate. The mold can be easily seen on the leaves, stem, and flowers of the plant.
Old remedies included the use of baking soda to flush out the fungus.
Fungus on plants can occur because of lack of sunlight and maintenance, as well as overwatering.
Fortunately, the plant can be repotted and taken outside for a good dose of sunshine. Water it, as needed, without going overboard and let the soil dry up completely before resuming your watering routine.
Mold is everywhere at every time and it causes respiratory problems like wheezing, sniffing and teary eyes. Carefully choose what you eat to avoid food-based mold and avoid sniffing foods to prevent inhaling mold spores.
If you are prone to mold allergic reactions your body overreacts to spores. Use antihistamines and decongestants to mitigate the effects of the allergy.
You can also use diffusers to reduce the moisture content in the air, limiting the growth of mold in your space.
There are several essential oils that have been proven to have a devastating effect on mold. These include oils like tea tree oil, clove, and cinnamon.
Unlike bleach or vinegar, which clears out the mold on the surface without penetrating into the material affected to combat the mold on the inside, essential oils are able to penetrate and kill off the mold within.
How to use essential oils for mold?
Using a spray bottle
The spray bottle is convenient and easy to carry around.
Mix the essential oil of choice with water and vinegar. Spray the mixture on the affected surface, letting it sit for a few minutes before wiping it off.
In case you are dealing with a heavy infestation of mold, add some castile soap to help with emulsification of the oil. Using a spray bottle is the best way to deal with mold on plants and in the bathroom.
Using a diffuser
This is the best option when you are dealing with a large area of the house under the mold.
For the diffuser, a synergy blend is the best option. A cold air atomizer is the best diffuser for the job, but just be sure that it doesn’t use water. A water-based diffuser will add more water into the atmosphere encouraging the growth of more mold.
The packaging of this essential oil is very well done.
Not only is the glass a nice thick constitution, but it is also dark amber in color and the bottle comes with a dropper to dispense the oil.
The oil is 100% pure and therapeutic grade and you will receive about 10 ml / .33 Ounces in the bottle.
How to use
You have the option of using it on its own or making a blend of your own.
However, the best way to use it is in a blend. Add it to other essential oils and use it in a diffuser. This way you get all the other benefits of cinnamon oil, like mood boosting and freshening the air as well.
We love that the company manufacturing this oil source their products from farms that employ sustainable farming practices, which are safe for the environment and ecosystems around them.
The oil is clearly enough to sustain daily use, giving you value for money.
Tea tree is highly recognizable for its emotive scent, so when you find a product that offers you that pure medicinal scent you can believe it’s authenticity.
This product from Radha Beauty gives you not just the full on the scent but also 100% purity on the extract. The packaging is a cobalt blue bottle that will keep the oil’s constitution from being affected by the sun. It also comes with a dropper for convenience.
How to use
The tea tree scents us an acquired taste.
Diffusing the scent can be overpowering in a space, so the best way to use it is in a spray bottle targeting specific moldy areas. For example, using it for moldy spots in the bathroom is spot-on.
If you are looking for an oil that will deliver on effective removal of mold, then Radha Beauty tea tree essential oil is your best bet.
It doesn’t short change you on the inherent properties of the oil and stays effective for a long time.
With Now Foods, you can always rely on the high quality of their products and this oil is not an exception.
As always, it is important to focus on the packaging of the product, since the packaging determines the longevity of the essential oil, even when not in use. Now has used an amber bottle to ensure the oil remains in its original constitution at all times.
We always recommend a bottle with a dropper for ease of dispensation, because it curbs wastage of precious essential oils and we are glad that they put that into consideration with their products.
The oil is extracted using steam distillation, giving you a 100% pure extract from cloves buds.
How to use
This is another oil with an overpowering scent. Cloves tend to have a cloying scent that can stick to everything, so we do not recommend it for use in a diffuser.
Like the tea tree oil, using it in small doses in specific moldy areas may be your best bet. Having said that, some people love the scent of cloves.
If the scent is not a deterrent for you, place a few drops into your synergy blend and work it into your space using a diffuser.
When you buy Now Foods essential oils, you are banking on the excellent company reputation that doesn’t disappoint. This product is well extracted, produced and packaged.
We have established that a synergy blend is best for a diffuser and one that features high-quality products that won’t compromise the overall working of your diffuser is even better.
With a customer rating of 4.2 out of 5 stars on Amazon, this product is clearly held in high esteem by users.
The blend contains no additives or fillers, guaranteeing you 100% natural oils co-existing together in harmony.
How to use
A diffuser, of course!
This one is pretty simple.
Add a few drops to your diffuser and let it work its magic of dispensing the oils in your space.
The combination of the scents and the purity of the products will ensure excellent results. Plus it will leave your space smelling great!
This is one of the highest recommended essential oils company on the market because of three things: the potency of their products, the thought put into how the ingredients gel together and the authenticity of the company.
This product contains lemon peel oil, rosemary leaf oil, cinnamon bark oil, cloves bud oil, and eucalyptus leaf oil. All these specific sections on the plants are used to produce their most potent extract and when blended together they produce an amazingly warm and refreshing scent.
The packaging is an amber bottle that protects the oils from degradation by the sun.
How to use
This is another one for your diffuser. A few drops diffused within your space will clear your air of the gross smell of mold and leave behind a clean scent.
This is a product that can be relied upon to deliver. A customer rating of 4.3 out of 5 stars on Amazon shows user approval of this product and what it can do.
More information about Thieves essential oil you can find here.
DIY essential oil blends for mold
Mix the ingredients in a spray bottle and use on the areas in the bathroom with mold.
Spray once letting the solution dry and then spray a second time to wipe of the loosened mold. Spray a third time and let it completely air dry.
Make this a cleaning routine for your bathroom.
Mix the oils and store in an amber or cobalt blue bottle. From your mixture place, 4-5 drops in your diffuser and let it begin working. You can repeat this daily if you do wish.
Car blend recipe
Mix the ingredients and spray into your car seats, seatbelts, carpets, floor mats, and floor area as well as the dashboard. Leave your car in direct sunlight and the doors open for a while.
Take the car to a professional cleaning service for a thorough wash. Make sure to let them know of your mold problem so they can give it a proper wash.
Repeat the cleaning with your home solution and the professional cleaners once a week for at least a month.
Of course, if you have an extensive mold problem you must contact a mold removal specialist to prevent issues with your health and damage to property. Having said that, the onus is on you to make sure that mold doesn’t grow or continue to grow in your space.
Using the best essential oils for mold is one sure way to guarantee that.
Choose from any of the above products for high-quality oils that work effectively and be sure to let me know in the comments below how it worked for you.
Or if you know of any other essential oils that blast mold away, feel free to share below.